Apple Color LaserWriter 12/600 PS User Manual
Page 56
What to do next
Once you decide how you want to set up the printer, proceed as follows:
m
PSERVER
To set up the printer as a print server, read about how to use
PCONSOLE in the next section, then
m if you want a simple setup, read “Step 2, Option A: Setting Up the
Printer as a Print Server (Using PCONSOLE),” later in this chapter.
m if you want to assign a password, read “Step 3: Assigning a Password for
the Print Server (Optional),” in Chapter 3 of the Color LaserWriter
12/600 PS User’s Manual.
m
RPRINTER
To set up the printer as a remote printer, read about how to use
PCONSOLE in the next section, then skip to “Step 2, Option B: Setting
Up the Printer as a Remote Printer (RPRINTER Mode),” later in
this chapter.
For both PSERVER and RPRINTER, you must also follow the instructions in
“Step 4: Setting Up the PostScript Printer Driver for NetWare,” in Chapter 3
of the Color LaserWriter 12/600 PS User’s Manual.
For more information about using the Apple Printer Utility read “Setting
Additional Parameters With the Apple Printer Utility for Windows,” in
Chapter 3 of the Color LaserWriter 12/600 PS User’s Manual.
For instructions on setting up the printer for access by Mac OS clients on a
NetWare network, see Appendix B of the Color LaserWriter 12/600 PS
User’s Manual.
Using PCONSOLE
PCONSOLE is a DOS-based utility for configuring printers on a NetWare
network. This chapter provides information on the set of basic PCONSOLE
operations required to set up the LaserWriter 12/660 PS. PCONSOLE is not
provided with the printer. It comes with your NetWare software. Detailed
information about PCONSOLE can be found in your NetWare
documentation.
The descriptions of PCONSOLE in this guide assume the use of keyboard
commands to navigate through the program and perform operations. With the
installation of a DOS mouse driver, you can also use a mouse to make
selections and choose options.
42
Chapter 3