ATTO Technology Diamond Storage Array S-Class - Manual (Page 4)

Contents
Preface
1.0 Diamond Storage Array Product Overview ..................................1
Diamond Storage Array features
Fibre Channel model
SCSI model
2.0 Diamond Storage Array Technical Overview ...............................3
ADXT Powers ATA to New Levels
3.0 Installation Instructions .................................................................5
Three major steps are required to set up the Diamond Storage Array
Step 1: physical setup
Step 2a: set up the Ethernet connection
Step 2b: connect to Ethernet
If the Diamond Storage Array is attached to a DHCP server
If the Diamond Storage Array is not attached to a DHCP server and you wish to change the
defaults
Step 3: set up RAID configuration
3.1 Components .........................................................................7
Floor model
Rack mount
Floor model
Rack mount
General instructions
3.2.1 Connecting a Fibre Channel Array .......................11
Autoconfiguration
Manual configuration
3.2.2 Connecting a SCSI Array .......................................13
To connect a SCSI array
4.0 Determining Drive and Sled Designations ...................................15
Numbering conventions
Physical numbering
Logical numbering
Examples
Unique serial number for each LUN
5.0 Accessing the Array .......................................................................17
Command Line Interface
ATTO ExpressNAV
In-band SCSI over Fibre Channel
RS-232 port
Ethernet port
SNMP