ATTO Technology Diamond Storage Array S-Class - Manual (Page 47)

36
Ethernet CLI commands
TelnetPassword
Specifies password for telnet session. Only one
username/password combination is available per
Diamond Storage Array. RestoreConfiguration default
sets the telnet username and password to the default
values. The password is case insensitive, with 1 to 8
characters.
Default: diamond
Set syntax: set TelnetPassword [password]
Requires a SaveConfiguration Restart command
TelnetTimeout
Specifies the number of minutes of inactivity which
elapses before a telnet session automatically times out.
Choices: 1-1440 minutes
Default: disabled
Set syntax: set TelnetTimeout [1-1440 | disabled ]
Requires a SaveConfiguration Restart command
Get syntax: get TelnetTimout
TelnetUsername
Specifies username for telnet session. Only one
username/password combination is available per
Diamond Storage Array. RestoreConfiguration default
sets the telnet username and password to the default
values.Username is case insensitive, 1 to 8 characters
Default: telnet
Set syntax: set TelnetUsername [username]
Requires a SaveConfiguration Restart command
The Telnet and SNMP protocols also use CLI
commands.