ATTO Technology Diamond Storage Array S-Class - Manual (Page 5)

5.1 In-band CLI Over the Fibre Channel ...................................19
I/O details
5.2 Serial Port Access ................................................................21
5.3 Ethernet Access: Telnet and SNMP Protocols ..................23
To connect to the Ethernet port
To use Telnet
To use SNMP
5.4 ATTO ExpressNAV: Browser-based Interface ...................25
Browser compatibility
To optimize ExpressNAV in Internet Explorer
Opening an ExpressNAV session
Navigating ExpressNAV
5.4.1 ExpressNAV Pages ................................................27
Status
Ethernet
SNMP
Serial Port
Fibre Channel
Storage Management
RAID
Clear Data
Logical Units
Rebuild
Configuration
Advanced
To use the advanced page CLI commands
Restart
Help
5.5 Command Line Interface Use and Guidance .....................29
5.5.1 Summary of CLI Commands .................................31
5.5.2 General Use Commands ........................................33
FirmwareRestart
Help
RestoreConfiguration
SaveConfiguration
SystemSN
VerboseMode
5.5.3 Ethernet Commands ..............................................35
EthernetSpeed
FTPPassword
IPAddress
IPDHCP
IPGateway
IPSubnetMask
SNMPTrapAddress
SNMPTraps