Connecting the wireless router to the wan, Powering on the router, Figure 5: attaching the lan cable – Allied Telesis AT-WR2304N User Manual
Page 19: Figure 6: attaching the wan cable
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual
9
Figure 5: Attaching the LAN Cable
Connecting the Wireless Router to the WAN
To connect the AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router to the WAN, perform the
following procedure:
1. Locate another RJ45 cable, which usually is with modem.
2. Connect one end of the cable to a modem or an existing network.
3. Connect the other end of the cable to WAN port on the back of the router, as shown in
Figure 6.
Figure 6: Attaching the WAN Cable
Powering On the Router
To power on the router, perform the following procedure:
Warning: Do not work on equipment or cables during periods of lightning activity.
Warning: Power adapter is used as a disconnection device. To de-energize equipment,
disconnect the power adapter.
1. Plug the power adapter on the back panel, as shown in Figure 7, and plug the power adapter into
a wall outlet.