Figure 90: advanced > qos (priority queue), Figure 91: advanced > qos (bandwidth allocation) – Allied Telesis AT-WR2304N User Manual
Page 59
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual
49
Figure 90: Advanced > QoS (Priority Queue)
1. Go to Advanced Æ QoS, and then select “Priority Queue”.
2. You can additionally assign an unlimited IP address which is not limited by all rules. Input the IP
address in “Local IP Address”.
3. Assign the priority of each protocol. You can also manually input QoS rule.
4. Click on “Apply” to save the configuration.
Bandwidth Allocation
Bandwidth allocation assigns a maximum or minimum bandwidth to users by IP.
Figure 91: Advanced > QoS (Bandwidth Allocation)
)
Type: Select the type you want to apply QoS.
)
Local IP range: Input the IP you want to manage here.
)
Protocol: Select network service here.
)
Port range: Corresponding service port shows here when the Protocol is selected. You can also
manually input the value.
)
Policy: When “Min” is selected, the equipment guarantees a minimal traffic capability. When