Allied Telesis AT-WR2304N - Manual (Page 40)

30 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
WDS-P2MP
P2MP mode implement is applied to connect two environments with different LAN. Both of the AP cannot
provide wireless services to users.
AP1 and AP2 are both AT-WR2304N
Mode: WDS Mode
Channel Number: 11
ESSID: AP1
Input AP2 MAC address
PC
Wireless User
Wireless User
Internet
Modem
Mode: WDS Mode
Channel Number: 11
ESSID: AP2
Input AP1 MAC address
Figure 50: WDS P2MP Diagram
AP1
Please set AP1 according to the following procedure.
1. Connect a PC and one of the LAN ports on AP1 with a RJ-45 cable, and then set the PC static IP,
e.g: 192.168.1.100.
2. In web browser, access 192.168.1.1 to enter the configuration menu, and then click on
“Wireless” Æ ”Basic”.
3. Use the following settings:
) Radio: Enable.
) Mode: WDS.
) Band: 82.4GHz (B+G+N) (must be the same with AP2).
) SSID: AP1.
) Auto Channel: Disable.
) Channel: 11 (must be the same with AP2).
) MAC Address 1: input AP2 MAC address. The format is “xxxxxxxxxxxx”.