Wpa pre-shared key, Wpa radius, Figure 32: wpa pre-shared key encryption – Allied Telesis AT-WR2304N User Manual
Page 31
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual
21
Hex(26 characters): Pick from 0~9, a~f, and input 26 characters as the key.
)
Enable 802.1x Authentication: 802.1x Authentication works with RADIUS server. In this
example, please uncheck this box.
3. Click on “Apply” to save the settings.
Note: To make connection successful, You must configure the wireless adapter the same
setting with the wireless router.
WPA Pre-shared Key
WPA strengthens network security by means of key derivation function, which is more secure then WEP.
Please make sure that the wireless adapter is compatible with this encryption.
1. Go to “Wireless” Æ “Security”.
Figure 32: WPA Pre-shared Key Encryption
2. Configure the parameter.
)
SSID Selection: If you enable more than one SSID, select here to configure.
)
Broadcast SSID: Enable or disable SSID broadcast. The default value is “Enable”.
)
WMM: Enable or disable WMM function. The default value is “Enable”.
)
Encryption: Select “WPA pre-shared key”.
)
WPA Type:
WPA (TKIP): WPA is the first generation of WPA encryption technology. Select it if your
wireless adapter does not support the latest standard.
WPA2 (AES): WPA2 use more rigorous encryption then WPA. Please make sure that the
wireless adapter is compatible with the encryption standard, or please select “WPA2 Mixed”.
WPA2 Mixed: The equipment detects connected wireless adapter and automatically switch
between WPA and WPA2. It is recommended using this setting.
)
Pre-shared Key Type:
Passphrase: 8~63 character key.
Hex(64 characters): 64 character key.
)
Pre-shared Key: Input your encryption key according to the pre-shared key type you select.
3. Click on “Apply” to save the settings.
Note: To make connection successful, You must configure the wireless adapter the same
setting with the wireless router.
WPA RADIUS
WPA RADIUS is usually implemented in enterprise environment. Before perform this setting, please make
sure you have a RADIUS server ready.
1. Go to “Wireless” Æ “Security”.