Allied Telesis AT-WR2304N - Manual (Page 39)

AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 29
) WAN Interface Type: Choose your IP address type according to your situation. If you choose
“Static IP Address”, you need to provide IP address, subnet mask, and gateway IP address.
Address”. If you choose “Dynamic IP Address”, please input hostname provided by your ISP. You
can click on “Clone MAC” to get MAC address from PC.
) Hostname: Input the parameter provided by your ISP.
) MAC Address: Click on “Clone MAC” to get MAC address from PC.
) PPTP Settings: Input the parameter provided by your ISP.
) Login: Input the parameter provided by your ISP.
) Password: Input the parameter provided by your ISP.
) Service IP address: Input the parameter provided by your ISP.
) Connection ID: You can optionally input connection ID here.
) MTU: Maximum transmission unit. It is recommended keeping default value.
) Type:
Keep Connection: When “Keep Connection” is selected, the equipment will always be on
line. It is recommended selecting “Keep Connection”
Automatic Connection: When “Automatic Connection” is selected, the equipment
connects when accessing to the Internet.
Manual Connection: When “Manual Connection” is selected, you need to manually connect
the equipment to the Internet.
) Idle Timeout: You can set maximum idle time here. The equipment disconnects if there is no
activity in a period of time.
Click on “Apply” after configuration.
Wireless
This page shows wireless LAN settings of AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router,
including SSID, security, access control and WPS. Please access by clicking on “Wireless” on the left side.
Basic
Figure 49: Wireless > Basic
) Radio: You can switch on or off the wireless function. The default value is “Enable”.
) Mode: You can switch wireless mode here.
AP: To use this equipment as a wireless broadband router.
WDS: To perform this mode, you need 2 AT-WR2304N. Please refer to next session for
detail configuration.
) Band: Select the wireless band standard. It is recommended to remain default setting.
) Enable SSID#: AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router provides up to
4 SSID. Enable more than one SSID here.
) SSID: Name your wireless connection here. It helps to identify your wireless LAN network. The
default value is “allied”, though it is recommended to have a unique SSID.
) Auto Channel: Enable or disable auto channel function here. The default value is “Disable”.
) Check Channel Time: Identify a period of time to renew channel.
) Channel: Identify a specific channel here. The default value is “11”.
Click on “Apply” after configuration.