Allied Telesis AT-WR2304N - Manual (Page 26)

16 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
Chapter 4: Network Configuration
First Configuration
Before using the equipment correctly, you must process first configuration. Please perform the following
procedure:
 Note: For firewall and anti-virus programs might interrupt the configuration, we suggest turning
those programs off temporarily until the end of the first configuration.
1. Open a browser (e.g. Internet Explorer) and enter IP address 192.168.1.1.
2. You are prompted for a username and password. The default user name is “manager” and the
default password is “friend”, as shown in Figure 22. Then click on OK.
Figure 22: Login Dialog Box
3. Click on “Wizard” on the left side, as shown in Figure 23.
Figure 23: Setting Page
4. The step-to-step wizard will guide you to process the first configuration. Please choose the
operation mode you want to use and then click on “Next”. This guild takes “AP Router Mode”
as an example.