Allied Telesis AT-WR2304N - Manual (Page 34)

24 AT-WR2304N - IEEE 802.11 b/g/n, Small Business Wireless Router - User Manual
) Lease time: You can set lease time here. Client PC has to request an IP again after a certain
portion of the lease time has expired.
) Start IP: You can limit the IP range here. This parameter works in DHCP “Enabled”.
) End IP: You can limit the IP range here. This parameter works in DHCP “Enabled”.
) Domain name: In usual situation, please keep the default value.
DHCP
This page shows information about PC connecting to AT-WR2304N IEEE 802.11 b/g/n, Small Business
Wireless Router.
Figure 36: System > DHCP
) Enable Static DHCP IP: This function helps you to identify specific client by its MAC address.
Check the box to enable this function. Input IP address and MAC address, and then click on “Add”
to add a static DHCP IP.
) Current Static DHCP Table: All static IP information is listed here.
Figure 37: System > Current Static DHCP Table
 Note: You can remove a rule by checking the item and clicking on “Delete Selected”, or click on
“Delete All” to remove all rules.
Schedule
AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router provides schedule function by which you
can administrate firewall and power-saving operation.