Allied Telesis AT-WR2304N - Manual (Page 41)

AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 31
) Set Security: You can optionally set wireless security by clicking on “Set Security”. Click on
“Apple” to save the sattings.
4. Click on “Apply” and wait for re-booting.
AP2
Please set AP2 according the following procedure.
1. Remove the cable from AP1, and then connect to one of the LAN ports on AP2.
2. In web browser, access 192.168.1.1 to enter the configuration menu. Click on “System” Æ
“LAN” and use the following settings:
) IP Address: 192.168.1.1
) DHCP Server: Disable.
3. Click on “Apply” to save the settings.
4. Go to “Wireless” Æ ”Basic” and use the following settings:
) Radio: Enable.
) Mode: WDS Mode.
) Band: 2.4GHz (B+G+N) (must be the same with AP1).
) SSID: AP2.
) Auto Channel: Disable.
) Channel: 11 (must be the same with AP1).
) MAC Address 1: input AP1 MAC address. The format is “xxxxxxxxxxxx”.
) Set Security: The security setting must be the same with AP1.
5. Click on “Apply” to save settings.
6. Set the PC to “Obtain an IP address automatically”.