Allied Telesis AT-WR2304N - Manual (Page 43)

AT-WR2304N IEEE 802.11 b/g/n, Small Business Wireless Router User Manual 33
Figure 53: WDS Security Settings (AP1)
6. Click on “Apply” to save the settings.
AP2
Please set AP2 according to the following procedure.
1. Un-plug the cable connecting the PC and AP1, and connect it to AP2.
2. In management configuration menu, check top-right side and make sure the equipment is at
“Repeater Mode”. You might need to wait for rebooting after this setting.
3. Go to “Wireless” Æ “Basic”, Click on “Site Survey”.
Figure 54: WDS Settings (AP2)
4. Find and select AP1 SSID. Click on “Connect” to set encryption configuration.
Figure 55: WDS Site survey
5. Set encryption according to AP1’s wireless setting. Click on “Apply”.