AMX UDM-0404 - Manual (Page 33)

Configuration
21 UDM-0404 4x4 Multi-Format Distribution Hub
Configuration
WebConsole Overview
Each UDM-0404 Hub can be configured for the correct network environment. It is also possible to
configure each Hub for the correct date and time. Configuration options are available via the UDM’s
built-in WebConsole, as described in this section.
The UDM-RX02 Receiver connected to the UDM-0404 is also configured via the 0404’s WebConsole.
Connecting to the UDM-0404
1. The default IP address of the UDM-0404 is 192.168.0.96.
2. Enter the IP address into the address field within a browser window.
3. To connect to the UDM-0404, a password is required.
The username should be left blank.
The password is admin (case-sensitive).
4. On initial connection, the Status page is displayed (FIG. 14).
This section describes the pages that comprise the UDM-0404’s WebConsole
interface in the order that they are presented (“Status”, “Setup”, "Inputs", "Devices"
“Schedule” and “Protocols”). However, on initial connection, you’ll probably need to
visit the Setup page first, to specify network configuration and other basic device
setup options for the Hub.
See the Configuration - Setup Page section on page 37 for details.
Use the included Ethernet Crossover cable for initial setup.
FIG. 14 Status page (Initial View)
Click links to access the six main
areas of the WebConsole
(initial view is Status)