AMX UDM-0404 - Manual (Page 50)

Configuration - Setup Page
38 UDM-0404 4x4 Multi-Format Distribution Hub
Network Configuration
The default IP address is: 192.168.0.96
The default UDP Port is: 2008
1. The following Network Configuration options must be configured (FIG. 37):
a. Hub IP Address, Subnet Mask and Default Gateway
b. UDP Port
c. Hub name (maximum of 30 characters).
2. Once the network environment has been configured, click on Update.
Date and Time Configuration
The Setup page is also used to set up the hub date and time, which is used for scheduling (FIG. 38).
1. Enter the desired values for the current Time and Date.
2. Click on Update when all configuration changes have been completed.
Restoring Hub Configuration and Connections
To ensure the configuration settings for the Hub are retained each time the hub boots it is advisable to
ensure the Restore options at the bottom of the Setup page have been enabled (FIG. 39).
Restoring Configuration and Connections
To ensure network configuration and port configuration are restored on boot up select Restore
configuration on power up option (see FIG. 39).
The UDM-0404 does not support DHCP. Please configure a static IP Address.
FIG. 37 Network Configuration options
All changes are immediate - once the IP address of the hub has been changed
redirect the web browser to the changed address.
FIG. 38 Date and Time Settings
FIG. 39 Restore options
Failure to select the Restore Configuration and Connection options will mean if the
Hub is reset the Hub configuration and connections will need to be re-configured.