AMX UDM-0404 - Manual (Page 41)

Configuration - Status Page
29 UDM-0404 4x4 Multi-Format Distribution Hub
Selecting Multiple Inputs For Display
An input can be assigned to multiple ports to save administration time.
1. To change more than one port to display a particular input, select the desired input from the drop
down list beside the Included option (FIG. 23).
2. Select the checkboxes beneath the Include column beside the relevant ports which are to display the
input selected in the Included drop-down menu. The selected ports are highlighted in blue
(FIG. 24).
3. Click on Execute to configure the ports to display the Included input (FIG. 25).
4. Once the configuration changes are complete, de-select the relevant ports by clicking their
corresponding checkbox in the Include column. The blue highlight disappears, and the specified
Ports are configured to use the Included input - see FIG. 26).
FIG. 23 Included drop-down menu
FIG. 24 Include checkboxes selected for all four Ports (to include Input "A1")
Click to select or deselect all Ports
Click checkboxes to include one or more Ports
The Include All link toggles all the Ports to be included on or off.
FIG. 25 Execute button
Click to set the selected Ports
to use the "Included" input