AMX UDM-0404 - Manual (Page 56)

Configuration - Devices Page
44 UDM-0404 4x4 Multi-Format Distribution Hub
Adding Centrally Located Devices
1. Name each device accordingly by typing in the Name text field.
2. Configure the device with the relevant IR protocol if appropriate.
Refer to the Creating and Learning an IR Protocol section on page 62 for details.
Issuing Commands To a Centrally Located IR Device
1. The Control toolbar at the bottom of the screen enables specific commands to be executed via the
browser connection (FIG. 47).
2. Select the command(s) to be performed for this device from the 1st and 2nd (Command) drop-down
menus (FIG. 48). Two commands can be issued to a device (1
st
and 2
nd
).
3. Click the Include checkbox to select the device(s) to be sent a command.
4. Click the Send to Included link to send the selected command to the Included device(s).
Ensure the correct port is selected.
The UDM-0404 needs to learn the device’s IR protocol (which button on its remote
performs which function). Refer to the Configuration - Protocols Page section on
page 59.
FIG. 47 Control Bar
FIG. 48 Optional controls for a device
The first command is limited to Power On, Off and A/V Select.