18 debug monitoring interface signals, 19 jtag interface signals – AMD Geode SC1201 User Manual
Page 68
68
AMD Geode™ SC1200/SC1201 Processor Data Book
Signal Definitions
32579B
3.4.18
Debug Monitoring Interface Signals
Signal Name
Ball No.
Type
Description
Mux
FPCICLK
B18
O
Fast-PCI Bus Monitoring Signals. When enabled, this
group of signals provides for monitoring of the internal
Fast-PCI bus for debug purposes. To enable, pull up
FPCI_MON (ball A4).
ACK#+TFTDE+
VOPCK
F_AD7
A18
O
PD7+TFTD13
F_AD6
A20
O
PD6+TFTD1+
VOPD0
F_AD5
C19
O
PD5+TFTD11
F_AD4
C18
O
PD4+TFTD10
F_AD3
C20
O
PD3+TFTD9
F_AD2
D20
O
PD2+TFTD8+
VOPD7
F_AD1
A21
O
PD1+TFTD7+
VOPD6
F_AD0
C21
O
PD0+TFTD6+
VOPD5
F_C/BE3#
C17
O
SLCT+TFTD15
F_C/BE2#
D17
O
PE+TFTD14
F_C/BE1#
B17
O
BUSY/WAIT#+
TFTD3+VOPD2
F_C/BE0#
D21
O
ERR#+TFTD4+
VOPD3
F_FRAME#
A22
O
STB#/WRITE#+
TFTD17
F_IRDY#
B20
O
SLIN#/ASTRB#+
TFTD16
F_STOP#
U29
O
AC97_RST#
F_DEVSEL#
V31
O
GPIO16+
PC_BEEP
F_GNT0#
U31
O
SDATA_IN
F_TRDY#
U30
O
BIT_CLK
INTR_O
D22
O
CPU Core Interrupt. When enabled, this signal provides
for monitoring of the internal GX1 core INTR signal for
debug purposes. To enable, pull up FPCI_MON (ball A4).
AFD#/DSTRB#+
TFTD2+VOPD1
SMI_O
B21
O
System Management Interrupt. This is the input to the
GX1 core. When enabled, this signal provides for monitor-
ing of the internal GX1 core SMI# signal for debug pur-
poses. To enable, pull up FPCI_MON (ball A4).
INIT#+TFTD5+
VOPD4+
3.4.19
JTAG Interface Signals
Signal Name
Ball No.
Type
Description
Mux
TCK
E31
I
JTAG Test Clock. This signal has an internal weak pull-up
resistor.
---
TDI
F29
I
JTAG Test Data Input. This signal has an internal weak
pull-up resistor.
---