Avaya GuestWorks - Manual (Page 17)

GuestWorks and DEFINITY ECS Release 9
Hospitality Operations
555-231-742
Issue 1
November 2000
Hospitality Operations
13 Guest Operations
5. Press the * button, followed by the # button.
■
You will hear confirmation tone (three short tones, followed by
silence).
6. Hang up the telephone.
Do Not Disturb
If your switch is equipped with the Speech Synthesizer circuit pack, guests can
enter their own Do Not Disturb requests. The following instructions should be
provided to your guests so they can access this feature.
During the Do Not Disturb period, all calls except for the following are blocked
from ringing your telephone:
■
Emergency calls, cleared through the front desk
■
Wakeup calls scheduled before your Do Not Disturb period ends.
The Do Not Disturb feature is accessed by using a feature access code or by using
a feature button on the guest telephone.
Enter a Do Not Disturb Request (Feature Dial
Access Code)
1. Pick up the handset of your telephone, and enter the Voice Do Not Disturb
feature access code _____.
■
Listen to the Do Not Disturb instructions. You will hear “You have
reached the Do Not Disturb service. Please enter the time you wish
Do Not Disturb to end, followed by the pound sign.”
2. Using the dial keypad, enter the time that you want the Do Not Disturb
time to end, followed by the # button. If you make a mistake, hang up and
start over.
■
If you used a time between 13:00 and 00:59, you will hear a
message saying “Thank you. Do Not Disturb is activated. It will be
turned off at _____.” You can hang up.
■
If you used a time between 01:00 and 12:59, you will hear a
message saying “A.M., press 2; P.M., press 7.”
3. Press the 2 button for A.M. or the 7 button for P.M.
■
You will hear a message saying “Thank you. Do Not Disturb is
activated. It will be turned off at _____.” You can hang up.