Pioneer PDR-F10 - Manual (Page 23)

5 More Play Features
23
English
En
Using repeat play
You can set the CD recorder to repeat either a
single track over and over, or the whole disc.
CD-R
CD-R
SET MENU
4 ¢
1 If the system isn’t already in CD-R
mode, press CD-R then stop
playback.
2 Press CD-R MENU.
3 Use
4 or ¢ to select REPEAT
MODE, then press SET.
4 Use
4 or ¢ to choose a
repeat mode, then press SET.
Three options are available:
• REPEAT TRK? – repeat one track
• REPEAT ALL? – repeat all tracks on
the disc
• REPEAT OFF? – turn repeat off
5 Start playback.
In one track repeat mode, any track you
choose will repeat. If you jump to another
track (using track skip or manual search),
then the new track will start repeating.
In all track repeat mode, whenever the end of
the disc is reached, the player will jump back
to the first track and continue playback.
You’re still free to skip tracks and use manual
search.
The repeat mode you set stays active until you:
• select another repeat mode, or switch
repeat mode off using the menu.
• open the disc compartment door.
• switch to standby mode.
Tip
You can use either of the repeat modes
together with the program play mode.
Setting the repeat mode to REPEAT ALL plays
the tracks in the playlist over and over. In
REPEAT TRK mode, just the current track in
the playlist repeats.
Checking the playlist order
You can only check the playlist order when
the disc is stopped. Once stopped, you can step
through the playlist using the
4 and ¢
buttons. Each track number in the playlist is
displayed.
If you then press
7, the total playing time of
the playlist is displayed.
Deleting the playlist
If you want to delete the playlist without
removing the disc, press
7 twice when the
disc is stopped.