Pioneer PDR-F10 - Manual (Page 32)

6 More Recording Features
32
En
Reinitializing a CD-RW disc
Use this to completely wipe all the informa-
tion from a CD-RW disc. You can do this with
a finalized or non-finalized disc.
1 Press CD-R MENU.
2 Use
4 or ¢ to select
INITIALIZE then press SET.
3 Press SET again to start erasing.
Disc erase takes half the length of the disc.
• Press CANCEL to cancel instead of
erasing.
Note: Once the erase operation has started,
you can abort by holding down the
7 button
for 10 seconds. Make sure though that you
erase the disc properly before using the disc
again.
Erasing tracks from a non-
finalized CD-RW
Use this to erase one or more tracks from a
CD-RW disc.
1 Press CD-R MENU.
2 Use
4 or ¢ to select ERASE
MODE then press SET.
3 Use
4 or ¢ to select the
tracks that you want to erase.
The display shows which tracks are to be
erased.
You can erase all tracks, just the last track, or
from any track number to the end of the disc.
For example, on a six track disc, you could
erase tracks 4, 5 and 6, but not just tracks 4
and 5.
4 Press SET again to start erasing.
Multi erase takes just a few seconds.
• Press CANCEL to cancel instead of
erasing.
5 When erasing is complete, press
OPEN / CLOSE .
This completes the operation and makes the
disc ready for recording.