Pioneer AVIC-X1 - Manual (Page 103)

101
Appendix
NAVI/AV
Appendix
Installing the Program
The program is installed to the Navigation Sys-
tem using the application disc.
This is not necessary if your dealer already
performed the installation.
When installing the program, you carry out the
following operations. When all the setup proce-
dures are completed, you can use the Navigation
System.
1
Park your vehicle in a safe place.
Leave the engine on, and make sure that the
handbrake is on.
2
Insert the Pioneer DVD Map disc to the
disc loading slot of the Navigation Sys-
tem.
• Once the installation of the program
starts, do not stop the engine of your vehi-
cle and do not switch off the Navigation
System until the installation is completed
and the following Audio screen appears.
3
Press the NAVI/AV button to change the
navigation screen.
4
Touch “Yes/Oui/Ja”.
When you start the navigation unit for the first
time, you will see a confirmation message
asking if you wish to select another language.
English is the default language of the Naviga-
tion System. If desired, you can select another
language as shown.
❒ To keep English, touch “No/Non/Nein”.
After this, proceed to Step 7.
❒ When you want to select another lan-
guage, touch “Yes/Oui/Ja”, and proceed
to the next step.
5
Select the language from the list.
Touch the language you want to use.
❒ The language selected here is reflected for
the Navigation functions (e.g., Destination
search, etc.) only.
Installation of the program, in the language
you chose, begins.
When the installation is complete, the open-
ing display appears.
1
Insert the disc while the vehicle is
parked.
2
Select the language used for the Navi-
gation System.
3
Setting the clock.