Pioneer AVIC-X1 - Manual (Page 81)

79
Chapter 7
Using the AV Source (Pioneer AV Equipments)
AV
1
Press DISP button and hold to display
dynamic label.
2
Touch any of 1 — 6 and hold to store the
selected dynamic label.
The memory number will display and the
selected dynamic label has been stored in
memory.
The next time you touch the same 1 — 6 in
the dynamic label display the stored text is
recalled from memory.
TV tuner
Watching the TV tuner
You can use navigation unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the TV
tuner’s operation manual. This section provides
information on TV operations with navigation unit
that differ from those described in the TV tuner’s
operation manual.
❒ Pressing the DISP button changes the screen
display.
➲ Switching screen display ➞ Page 92
(1) Source icon
Shows which source has been selected.
(2) Band indicator
Shows which band the TV tuner is tuned to.
(3) Preset number indicator
Shows which preset has been selected.
(4) Channel indicator
Shows which channel the TV tuner is tuned.
(5) Preset list display
Shows the preset list.
1
Touch the source icon and then touch
“TV” to select the TV.
2
Touch the screen to display the touch
panel keys.
3
Touch “BAND” to select a band.
Touch “BAND” repeatedly until the desired
band is displayed, TV1 or TV2.
4
To perform manual tuning, touch or
briefly.
The channels move up or down step by step.
(2) (1) (4)
(5)
(3)
TV