Pioneer AVIC-X1 - Manual (Page 20)

18
Chapter 1
Basic Operation
NAVI/AV
navi mode). These functions buttons, which can-
not be used in the memory navi mode, are indi-
cated in dark grey. (For details, see page 19.) If
you want to use these functions, please insert the
map disc again. In addition, you may need to
insert the map disc and store new data in the
memory during navigation operation, such as
when the destination is far away. The memory
navi mode uses the following map data to per-
form navigation.
Memory navi indicator
When new route guidance starts, the route data
from the map disc is read into the memory of the
navigation unit. The status of the memory navi
mode is indicated by the following icons on the
top left of the map screen.
(green flashes): Reading the data
(green is lit): Operated in memory navi mode
(red is lit): Operated in memory navi mode,
but the distance for guidance is 20 km or less.
❒ Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the map disc.
When disappears, memory navi mode is
ready. You can now remove the map disc and use
the memory navi mode function.
How to listen to a CD
You can listen to a CD by removing the map disc
from the navigation unit.
➲ About Memory Navigation ➞ “Memory Navi
Mode” on page 17. (For details, see page 102.)
1
Press the EJECT button to remove the
map disc.
2
Insert the CD to the disc loading slot.
3
Touch “YES”.
The audio CD set in the navigation unit is
played.
❒ DISC AUTO is off in the default setting.
➲ DISC AUTO ➞ Page 90
4
Press the NAVI/AV button to switch the
Audio screen.
Pressing the NAVI/AV button switches
between the navigation map screen and the
audio screen.
Information of Audio