Pioneer AVIC-X1 - Manual (Page 57)

55
Chapter 5
Customising Your Navigation System
NAVI
Background Picture Setting
➲ The background picture can be changed ➞
Page 48
Language Selection
➲ The language displayed can be set ➞
Page 101
Once you change the language, installation of
the program starts.
• Once the installation of the program
starts, do not stop the engine of your vehi-
cle and do not switch off the Navigation
System until the installation is completed
and the map of your surroundings appears.
Mute Setting
Items related to muting of sound volume can be
set.
❒ When Voice Guidance or Voice Recognition
are ON, be sure to set the TEL/GUIDE setting
in the Audio Menu to MUTE or ATT.
• Voice Recognition
This setting controls whether the volume of the
Audio source is automatically muted during
voice operation.
On* :
During voice operation, the volume of the Audio
source is muted automatically.
Off :
The volume of the Audio source stays the same
during voice operation.
❒ If you select “Off”, the sound from the Audio
source may interfere with the voice recogni-
tion system.
• Voice Guidance
This setting controls whether the volume of the
Audio source is automatically muted during
voice guidance.
On* :
During voice guidance, the volume of the Audio
source is muted automatically.
Off :
Volume of the Audio source stays the same dur-
ing voice guidance.
Time
Adjusts the systems clock. The time difference
(+, –) between the time originally set in this unit
is set here.
You can also select summer time On/Off.
➲ Time settings ➞ Page 102
On :
Summer time is taken into account.
Off* :
Summer time is not taken into account.
❒ When the period of summer time comes, or
when the summer time ends, this unit does
not automatically change the summer time
setting.
➲ Change the summer time setting ➞ Page 102
Modify Current Location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
KM Mile Setting
This setting controls the unit of distance dis-
played on your Navigation System.
km * :
Show distances in kilometres.
Mile :
Show distances in miles.
Mile & Yard :
Show distances in miles and yards.
Auto Voice Recognition
After you have started the engine, turn on voice
recognition and set whether or not to perform all
operations up to route searching by voice.
(This function is effective only when a route is not
set.)
❒ You should set “Auto Voice Recognition”
only when the microphone of the voice recog-
nition system (sold separately) is connected.
❒ In order to operate the navigation unit by
voice, you need the microphone kit (CD-VC1),
which is sold separately. Before connecting
the microphone, be sure to first turn the igni-
tion switch OFF (ACC OFF). When the micro-
phone is connected, turn the ignition switch
ON (ACC ON).