Pioneer AVIC-X1 - Manual (Page 45)

43
Chapter 4
Editing the Navigation Utilities
NAVI
Loading registered locations
data from a CD-R
Address Book data stored on a CD-R (-RW) can
be loaded to the Navigation System.
This function is used when moving Address Book
data from a Pioneer navigation unit with a PC
card slot (e.g., AVIC-900DVD) to a Pioneer naviga-
tion unit without a PC card slot (e.g., AVIC-X1).
❒ Replaces the Address Book registered place
data stored on the System with the registered
place data stored on the disc. At this time, the
Address Book registered place data on the
System may be lost.
❒ When moving data, copy the folder named
“POINT” from the PC card to the personal
computer. Then use the personal computer to
store the “POINT” folder in the first level of
the CD-R (-RW).
1
Insert the CD-R (-RW) to the disc loading
slot.
2
Touch “Information” in the Main menu,
then touch “Read from Disc”.
The list of groups appears.
3
Touch the desired group.
4
Touch the desired locations.
Selected locations are marked. To load the
data from other locations, repeat this step.
Alternative option:
Select All:
All the locations are selected at once.
5
Touch “OK”.
The data of the selected locations is stored in
the Address Book.
Setting Areas to Avoid
If you register Areas to Avoid, such as crowded
intersections or congested areas, routes can be
calculated that avoid those areas. Areas to
Avoid can be set from the Route Options menu.
Registering an Area to Avoid
This section describes how to register an Area to
Avoid for the first time. You can register up to five
Areas to Avoid.
1
Touch “Route Options” in the Main
menu, then touch “Areas to Avoid”.
2
Select one of the items shown in “New
Area”.
When registering for the first time, any item
on the list is shown as “New Area”.
3
Select the place to register and display
the map.
➲ Searching places to register ➞ Chapter 3
Once a search is complete, a map with the
specified location at its centre appears.
4
Change the map scale and decide the size
of the Area to Avoid.
The Area to avoid is enclosed in a red frame.
You can also change the map scale though
the maximum map scale for registering Areas
to Avoid is 100 m (0.1 miles).