Pioneer AVIC-X1 - Manual (Page 94)

92
Chapter 8
Customising the Audio Source Setting
AV
• MANUAL — You have to press OPEN/
CLOSE button to open/close the display
• AUTO — The display automatically opens/
closes when power to navigation unit is
turned on
Using the AUX source
An IP-BUS-RCA Interconnector such as the CD-
RB20/CD-RB10 (sold separately) lets you connect
navigation unit to auxiliary equipment featuring
RCA output. For more details, refer to the IP-BUS-
RCA Interconnector owner’s manual.
Selecting AUX as the source
1
Touch the source icon and then touch
“AUX” to select AUX as the source.
When the source icon is not displayed, you
can display it by touching the screen.
If the auxiliary setting is turned “OFF”, “AUX”
cannot be selected.
➲ Switching the auxiliary setting ➞ Page 89
Switching the background dis-
play
You can switch background displays while listen-
ing to each source.
1
Press ENT button.
Each time you press ENT button the display
changes in the following order:
Audio source
• NAVI (Normal wall paper) — AV (Video
input) — DVD (DVD video in the built-in
DVD drive)
Video source
• Video of currently selected source — NAVI
(Normal wall paper) — AV (Video input) —
DVD (DVD video in the built-in DVD drive)
❒ When the AV (Video input) setting is not
set to “VIDEO”, the background display
will not switch to AV (Video input).
➲ Switching the AV input setting ➞ Page 90
❒ Only the REAR ON mode is active, the
background display will switch to DVD
(DVD video in the built-in DVD drive).
➲ Using the rear display ➞ “Hardware Man-
ual”
❒ During the memory navi mode, you cannot
switch to DVD (DVD video in the built-in
DVD drive).
Switching the Screen Using the
DISP Button
You can change the screen display using the
DISP button.
(E.g., RADIO)
❒ You cannot switch the screen display with the
DISP button for the following sources.
S-DVD (Source DVD), AV, AUX, EXT
❒ The indication of the information plate will be
switched for the items marked with asterisk
(*).
RADIO
Preset list — list off (Information plate only)
RADIO (RDS)
P. CH DIRECT (preset station list) — PS (program
service name) — PTY (PTY information)
❒ If a PTY code of zero is received from a station
or the signal is too weak for this unit to pick
up the PTY code, you cannot switch to PTY
information display. In this case, if you have
selected the PTY information display, the dis-
play will change to a blank screen.
DVD video
Normal display — Information plate 1 (with View-
ing angle, Subtitle language, Audio language) —
Information plate 2 (with Repeat range)
Preset list
Information plate
Other Functions