Chapter 8, Customising the audio source set- ting, Audio adjustments – Pioneer AVIC-X1 User Manual

Page 85: Using balance adjustment, Customising the audio source setting, Using the equaliser

Advertising
background image

83

Chapter 8

Customising the Audio Source Setting

AV

Chapter 8

Customising the Audio Source Setting

Various settings according to your audiovisual
requests are available with the audio source. This
chapter describes the methods of changing the
various settings and how to set of the LCD panel.

Audio Adjustments

Introduction of audio adjust-
ments

(1) Audio display
Shows the audio function names.

➲ How to display the AUDIO menu ➞ Page 57

If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is
selected as the equaliser curve, you can switch to
BASS and TREBLE.
Only when the subwoofer controller setting is
PREOUT FULL, NON FADING will be displayed
instead of SUB WOOFER.

➲ Setting the rear output and subwoofer con-

troller

➞ Page 89

When selecting the FM tuner as the source, you
cannot switch to “SLA”.

Using the equaliser

The equaliser lets you adjust the equalisation to
match vehicle interior acoustic characteristics as
desired.

Recalling equaliser curves

There are six stored equaliser curves which you
can easily recall at any time. Here is a list of the
equaliser curves:

1

Press EQ button to select the equaliser.
Press EQ button repeatedly to switch
between the following equalisers:
POWERFULNATURALVOCAL
CUSTOMFLATSUPER BASS
CUSTOM is an adjusted equaliser curve

that you create.

❒ A separate CUSTOM curve can be cre-

ated for each source. If you make adjust-
ments, the equaliser curve settings will be
memorised in CUSTOM.

❒ When FLAT is selected no supplement or

correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
FLAT and a set equaliser curve.

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.

1

Touch “FAD/BAL” in the AUDIO menu.
When the rear output setting is REAR SP
SUB. W, BALANCE will be displayed instead
of FAD/BAL.
➲ Setting the rear output and subwoofer con-

troller

➞ Page 89

(1)

Display

Equalizer curve

POWERFUL

Powerful

NATURAL

Natural

VOCAL

Vocal

CUSTOM

Custom

FLAT

Flat

SUPER BASS

Super bass

Audio Adjustments

Advertising