Pioneer AVIC-X1 - Manual (Page 104)

102
Appendix
NAVI/AV
6
Press the NAVI/AV button to change the
navigation screen.
Some time is needed until navigation is ready.
7
Check the details of the cautionary mes-
sage and touch “OK”.
8
To set the time difference, touch “+” or
“–”.
The time difference between the time origi-
nally set in this unit (Central European Time)
and the current location of your vehicle is
shown. If necessary, adjust the time differ-
ence. Touching “+” or “–” changes the time
difference display in one-hour increments.
The time difference can be set from +3 to –3
hours.
9
If necessary, set to summer time.
Summer time is off by default. Touch
“Summer Time” to change the time if you
are in the daylight saving period. This turns
the display below Summer Time “On”.
10
To complete the setting, touch “Back”.
The map of your surroundings appears.
This completes the setup of your Navigation Sys-
tem. Chapter 1 explains the basic operation of
your Navigation System.
➲ To change the language and time later ➞
Page 55
Memory Navi Mode
While the map disc is inserted, you can store the
data on the map disc into the memory of the nav-
igation unit. If the map disc is removed from the
navigation unit after the data is stored, navigation
is performed using the data in the memory
(memory navi mode). In the memory navi mode,
you can play a music CD or DVD video on the
navigation unit while navigation is taking place.
The operation is automatically switched to the
memory navi mode when the map disc is
removed from the navigation unit.
Time difference