Sharp XE-A203 - Manual (Page 19)

17
Part
1 QUICK START GUIDE
Part
2
Part
3
2. Text programming (Press s to skip. / Press A to terminate.)
3. Unit price programming (Press s to skip. / Press A to terminate.)
4. Entry type programming (Press s to skip. / Press A to terminate.)
SELECT OF TAX1
TAX1 YES
s
(2) Press the s key to register the entry type.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
PRESET : : :
(1) Press : key 3 times to display "PRESET".
Each time : key is pressed, the display shows
"INHIBITED", "OPEN", "PRESET" and "OPEN &
PRESET" in this order.
Default setting is "OPEN".
When the unit price is changed from the default
setting ("0") in step 3, "OPEN & PRESET" will be
displayed first.
However, when the default setting is not changed,
"OPEN" will be displayed first.
DEPT ENTRY TYPE
OPEN & PRESET
s
(2) Press the s key to register the unit price.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
300 300
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
Default setting is 0.
PRICE
0.00
s
(3) Press the s key to register the item name.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
BOOK BOOK
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P and @ key moves the cursor to
the right and left respectively.
ENTER TEXT
DEPT.06
:
(1) Press : key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
A203_1 Quick Start Guide 06.5.1 7:25 PM Page 17