Sharp XE-A203 User Manual
Page 23
21
Part
1
QUICK START GUIDE
Part
2
Part
3
The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered.
The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered.
By default, PLU/subdepartment setting for 1 through 210 codes are possible, and can extend to 1200. To
extend the number, please refer to “EJ memory type” on page 67.
• To keep current setting on each programming, press the
s
key when the corresponding
guidance message is firstly displayed.
• When pressing the
A
key in the middle of procedure, the programming will terminate and the
data you entered before the press of
A
is saved.
• When pressing the
l
key twice in the middle of procedure, the programming will terminate and
the data you entered before pressing the
l
key twice is NOT saved.
• When pressing the department,
-
,
%
,
&
,
V
,
r
,
R
,
X
,
Y
,
c
or
b
key in the middle
of procedure except while entering texts or prices, the programming will move to the pressed key
programming.
1. Specify the PLU code.
2. Text programming
(Press
s
to skip
. / Press
A
to terminate.)
3. Unit price programming
(Press
s
to skip
. / Press
A
to terminate.)
500
500
(1) Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
Default setting is 0.
PRICE
0.00
s
(3) Press the
s
key to register the item name.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
MELON_
MELON
(2) Enter an item name.
A maximum of 16 characters can be entered.
Please refer to “Guidance for text programming” on
page 13 for entering the item name.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
PLU.0071
:
(1) Press
:
key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
PLU.0071 0071
ENTER[00]KEY
71
p
(1) Enter PLU code using numeric key, and then press
the
p
key.
Immediately after displaying the current text data and
the corresponding PLU code you entered, guidance
message for the next step will be displayed.
Operator display
Key operation
7
PLU (Price Look-Up) and Subdepartment Programming
A203_1 Quick Start Guide 06.5.1 7:25 PM Page 21