S86 @ a, S@ 90 – Sharp XE-A203 User Manual
Page 69
67
Part
3
FOR THE MANAGER
Part
2
Part
1
Thermal printer density
* 50 (100%) is the default setting. To make the print darker, set a larger number, and to make the print lighter,
set a smaller number.
EJ memory type
When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
*A: 0 for EJ 8000 lines and PLU 1200 codes
1 for EJ 9000 lines and PLU 210 codes (default)
Training clerk specification for training mode
For the details of clerk training, please refer to “TRAINING MODE” on page 73.
s
86
@
20
s A
Key operation example
Clerk number
(1 to 25)
s
To cancel
s
86
@
A
s
90
@
0
A
Key operation example
A
*A
s
@
90
s
50
@
70
s A
Key operation example
*
Printer density
(00-99)
A
s
To set 0
s
50
@
A203_3 FOR THE MANAGER(SEEG) 06.5.6 8:08 PM Page 67