Sharp XE-A203 - Manual (Page 24)

22
4. Associated dept. programming (Press s to skip . / Press A to terminate.)
5. Function programming (Press s to skip . / Press A to terminate.)
To program for the incremented PLU code, return to the step 2.
When you want to program for other than incremented PLU code, return to the step 1.
6. Terminate programming
Unit price
PLU/subdept. 1/0 PLU code
Item name
Associated dept.
Print
0.00 A
(1) Press the A key to terminate PLU programming.
PLU.0072 0072
ENTER[00]KEY
s
(2) Press the s key to register the setting.
Immediately after displaying current text setting and
the corresponding PLU code for the next PLU,
guidance message will be displayed.
The PLU code is automatically incremented for a
new PLU programming, and ready for text
programming for the incremented PLU code.
(1) Go to (2) when the function does not need to be
changed from "PLU". Otherwise, press : key to
display "SUBDEPT".
Each time
: key is pressed, the display shows
"SUBDEPT" and "PLU" alternatively.
Choose "PLU" for using the PLU code as PLU and
"SUBDEPT" for using the PLU code as
subdepartment.
Default setting is "PLU".
ENTER PLU TYPE
PLU
s
(2) Press the s key to register the associated
dept. code.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
1 1
(1) Enter an associated dept. code using numeric key.
For dept. 1 through 16, you may press the
corresponding department key.
For dept.17 through 32, you may press the
D key,
and then press the corresponding department key.
Default setting is dept. 1.
For deleting PLU, enter 0 instead of an associated
dept. code.
ENTER DEPT# s
(2) Press the s key to register the unit price.
Guidance message for the next step will be displayed.
A203_1 Quick Start Guide 06.5.23 1:44 PM Page 22