Sharp XE-A203 User Manual
Page 20
18
5. VAT/tax 1 status programming (Press
s
to skip. / Press
A
to terminate.)
6. VAT/tax2 status programming (Press
s
to skip. / Press
A
to terminate.)
7. VAT/tax3 status programming (Press
s
to skip. / Press
A
to terminate.)
SELECT OF TAX4
TAX4 NO
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the VAT/tax 3 status does not need
to be changed from "TAX3 NO". Otherwise, press
:
key to display "TAX3 YES".
Each time
:
key is pressed, the display shows
"TAX3 YES" and "TAX3 NO" alternatively.
Default setting is "NO".
SELECT OF TAX3
TAX3 NO
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the VAT/tax 2 status does not need
to be changed from "TAX2 NO". Otherwise, press
:
key to display "TAX2 YES".
Each time
:
key is pressed, the display shows
"TAX2 YES" and "TAX2 NO" alternatively.
Default setting is "NO" for dept. code 1 to 10 and 21
to 99, and "YES" for dept. code 11 to 20.
SELECT OF TAX2
TAX2 NO
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the VAT/tax 1 status does not need
to be changed from "TAX1 YES". Otherwise, press
:
key to display "TAX1 NO".
Each time
:
key is pressed, the display shows
"TAX1 NO" and "TAX1 YES" alternatively.
Choose "YES" for taxable and "NO" for non-taxable.
Default setting is "YES" for dept. code 1 to 10 and
21 to 99, and "NO" for dept. code 11 to 20.
When any entry of a taxable department is made in
a transaction, tax is automatically computed
according to the associated tax rate as soon as the
transaction is completed.
A203_1 Quick Start Guide 06.5.1 7:25 PM Page 18