Bard TCS22-***-003 - Manual (Page 46)

2100-444-003A
Page 40
screen. Press the <F1> key. To override the displayed item press the <Change> key again. There are
seven (7) actions now available, On, Off, Reset, O/R On, O/R OFF, Clr Verify Alr, and Clear O/R. Use
the <Up> and <Down> keys to choose 1 of the 7 actions available. Not all actions are available for each
item. The available actions are shown above. Once the desired action is displayed press the <Enter> key
to initiate the action. If the action was accepted the screen will show the changed output or override
status.
If you do not have authority to override the outputs will not be highlighted. A supervisor
authority level is required override outputs. If you have authority to override the value will be
highlighted after pressing the <F1> key.
To enter a password, press <F2> key at any time. See the password section in this manual for
proper password entry method.
5.3.5.1 #1 BLOWER OVERRIDE
OVERRIDES
UNIT #1
F1 = EDIT MODE
ENTER TO EDIT
BLOWER OFF
OVR STATUS AUTO
VERIFY ALR STAT OK
ACTION NO OPER.
ECON OUTPUT OFF
OVR STATUS AUTO
ACTION NO OPER
COMP. OUTPUT OFF
OVR STATUS AUTO
VERIFY ALR STAT OK
ACTION NO OPER
HEAT OUTPUT OFF
OVR STATUS AUTO
ACTION NO OPER
LEAD UNIT IS 1
CHANGE LEAD UNIT ***
CONT. BLOWER OFF