Bard TCS22-***-003 - Manual (Page 55)

2100-444-003A
Page 49
6.3 ASI Expert / Bard ClimateWatch Software
Start the Expert software by double clicking on the Expert icon in the ASI Program Group. The
Expert program can be used to communicate remotely or directly with the TCS22 or TCS22 controller.
6.3.1 SCREEN OVERVIEW
The program will begin with the screen shown below. At the top of the initial screen there is a
Menu Bar. Below the menu bar is the Tool Bar. The status bar is at the very bottom of the screen. The
left side of the screen displays the Project Folders and the right side is the Controller Information Area.
Expert uses projects to group information about different TCS controllers. Each site or building
should have its own project. The project can be named the same as the building for convenience.
6.3.1.1 Menu Bar
The menu bar contains five drop down menus; Project, Options, View, Device, Help.
The Project menu allows you to open, close, save and create projects. It also contains a Quick
Launch item that remembers the last four projects that were accessed. The Project menu also contains
the Print Setup and Print items. The Controller Information Area can be printed at any time by using the
Print item on this menu. Clicking the Exit item will close the program.