Bard TCS22-***-003 - Manual (Page 67)

2100-444-003A
Page 61
6.4.1.2 Unit #1 Status
The Blower status will show if Blower operation is On or Off.
The Filter status will show if the Filter is OK or Dirty.
The Economizer will show if Economizer operation is On or Off.
The Compressor status will show if the Compressor is On or Off.
The Heater status will show the status of the Electric Heat Strip, either On or Off.
The Supply Air Temperature is the temperature of the Air leaving the unit. This temperature will
be Cooler than Zone Temperature when the unit is in the Cooling Mode, and Warmer the Zone
Temperature when the unit is in the Heating Mode.
The Lead/Lag status indicates if the unit is the Lead or the Lag unit. The Lead unit is the Primary
conditioning unit for the structure. The Lag unit will be the Secondary conditioning unit for the structure
6.4.1.3 Unit #2 Status
Same as Unit #1 status above except for Unit #2
6.4.1.4 Time & Place
The site name that is stored in the controller is displayed and can be changed by clicking on the
name. Site Time and Date are the time and date in the TCS controller. Click the Time Date Sychronize
button to set the controller time and date to the current time and date of the computer communicating
with the controller.