Barco CINE7 R9010050 - Manual (Page 13)

2. AC Power
2. AC POWER
Overview
• AC Power Cord Connection
• AC Power Voltage
• Switching ON/OFF
2.1 AC Power Cord Connection
How to connect the AC Power Cord?
Use the supplied power cord to connect your projector to the wall outlet.
1. Plug the female power connector into the male connector at the front side of the electronic block. (image 2-1)
Image 2-1
Power connection
2.2 AC Power Voltage
What is the AC Power Voltage?
The power input voltage is autoranging between 100V (-10%) and 240V (+6%).
2.3 Switching ON/OFF
Switching and led indication
The projector is switched ON and OFF using the power (mains) switch ON/OFF.
• Pressed : ON
• Not pressed : OFF
R5976584 BARCO CINE7 26022003 9