2 multiplier mode, Multiplier mode, Main menu line multiplier on/off – Barco CINE7 R9010050 User Manual
Page 39: 2 multiplier mode what can be selected, Start up the multiplier mode
6. Main Menu
Line Multiplier ON/OFF
1. Push the cursor key
↑
or
↓
to select Line Multiplier. (menu 6-5)
2. Press ENTER to toggle between ON and OFF.
When in the ON state, all multiplier functions are selectable.
IMAGE PROCESSING
Line Multiplier :
ON
Multiplier Mode
Motion Processing :
ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-5
6.2.2.2
Multiplier mode
What can be selected?
The multiplier menu makes it possible to select different scan rate for the connected video signal.
Interlaced
Short for interlaced scanning. Also called line interlace. A system of video scanning whereby the odd- and even-
numbered lines of a picture are transmitted consecutively as two separate interleaved fields. Interlace is a form of
compression.
Progressive
Short for progressive scanning. A system of video scanning whereby lines of a picture are transmitted consecutively,
such as in the computer world
Start up the Multiplier mode
1. Push the cursor key
↑
or
↓
to select Multiplier mode. (menu 6-6)
2. Press ENTER to select.
One of the different Multiplier mode menus will be displayed. (menu 6-7)
IMAGE PROCESSING
Line Multiplier :
ON
Multiplier Mode
Motion Processing :
ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-6
MULTIPLIER MODE
50Hz
625 lines
P
50Hz
935 lines
P
100Hz
625 lines
P
50Hz
1250 lines
P
100Hz
1250 lines
I
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-7
MULTIPLIER MODE
60Hz
525 lines
P
60Hz
785 lines
P
120Hz
525 lines
P
60Hz
1050 lines
P
120Hz
1050 lines
I
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-8
R5976584 BARCO CINE7 26022003
35