Barco CINE7 R9010050 - Manual (Page 62)

8. Random Access Adjustment Mode
How to start up the Line Multiplier settings?
1. Push the cursor key
↑
or
↓
to highlight Line Multiplier and press ENTER to select. (menu 8-17)
The Image Processing menu will be displayed. (menu 8-18)
PICTURE TUNING
COLOR BALANCE
SYNC: FAST
DECODING : EBU
PORT2 :
VIDEO
PEAKING
LINE MULTIPLIER : ON
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-17
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING: ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN: OFF
ADVANCED SETTINGS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-18
8.5.7.2 Switching the multiplier ON/OFF
How to switch
1. Push the cursor key
↑
or
↓
to select Line Multiplier. (menu 8-19)
2. ENTER to toggle between Line Multiplier : ON and Line Multiplier : OFF.
When the line multiplier is on, all items in the menu are accessible.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING: ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN: OFF
ADVANCED SETTINGS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-19
8.5.7.3 Motion Processing On/Off
What can be done?
With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.
How to toggle Motion Processing On/Off?
1. Push the cursor key ↑ or ↓ to highlight Motion Processing. (menu 8-20)
2. Press ENTER to toggle Motion Processing On/Off.
3. Press EXIT to return to the Picture Tuning menu.
IMAGE PROCESSING
LINE MULTIPLIER : ON
MOTION PROCESSING: ON
OUTPUT MODE
VIDEO EQUALIZING
NOISE REDUCTION
CONTRAST ENHANCEMENT
SPLIT SCREEN: OFF
ADVANCED SETTINGS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-20
58 R5976584 BARCO CINE7 26022003