3 motion processing on/off, 4 video equalizing, 36 6.2.2.4 video equalizing – Barco CINE7 R9010050 User Manual
Page 40: Motion processing on/off, Video equalizing, Main menu changing the scan rate, 3 motion processing on/off what can be done, How to toggle motion processing on/off, 4 video equalizing what can be done
6. Main Menu
Changing the scan rate
1. Push the cursor key
↑
or
↓
to select a new scan rate. (menu 6-9)
2. Press ENTER to activate this scan rate.
50Hz
Vertical frequency of the image
1250 Lines
Quantity of horizontal lines
P = Non Interlaced = Progressive Scan
I = Interlaced
Interlace mode
MULTIPLIER MODE
50Hz
625 lines
P
50Hz
935 lines
P
100Hz
625 lines
P
50Hz
1250 lines
P
100Hz
1250 lines
I
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-9
6.2.2.3
Motion Processing On/Off
What can be done?
With this function it is possible to recognize whether the source material was originally film or video. That prevents the creation of
motion artifacts.
How to toggle Motion Processing On/Off?
1. Push the cursor key
↑
or
↓
to select Motion Processing. (menu 6-10)
2. Press ENTER to toggle Motion Processing On/Off.
IMAGE PROCESSING
Line Multiplier :
ON
Multiplier Mode
Motion Processing :
ON
Video Equalizing
Noise Reduction
Contrast Enhancement
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 6-10
6.2.2.4
Video Equalizing
What can be done?
The sharpness of the image can be adjusted for 3 frequency bands (low, medium and high) separately. In addition to the 7 prepro-
grammed factory presets a customized adjustment of the sharpness for 3 ranges is also possible.
36
R5976584 BARCO CINE7 26022003