Barco CINE7 R9010050 - Manual (Page 97)

9. Service Mode
How to set All settings to Midposition?
1. Push the cursor key
↑
or
↓
to highlight All Settings to Midpos. (menu 9-28)
2. Press ENTER to select.
A confirmation screen will be displayed.
3. Press ENTER to confirm, press EXIT to cancel the reset.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-28
How to Undo All settings to Midposition?
As long as the projector is playing on the same source (= same adjustment block) it is possible to return to the previous settings.
Undo All Settings to Midpos is displayed in stead off All Settings to Midpos.
1. Push the cursor key ↑ or ↓ to highlight Undo All Settings to Midpos. (menu 9-29)
2. Press ENTER to reset the All settings to the previous settings.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
UNDO ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-29
9.4.6 R & B Convergence to Midposition
What can be done?
All convergence settings for red and blue are set to midposition.
This item is password protected.
How to set R & B Convergence to Midposition?
1. Push the cursor key
↑
or
↓
to highlight R&B Convergence Mid. (menu 9-30)
2. Press ENTER to select.
A confirmation screen will be displayed.
3. Press ENTER to confirm, press EXIT to cancel the reset.
MEMORY MANAGEMENT
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
GR CONVERGENCE MID
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 9-30
R5976584 BARCO CINE7 26022003 93