10 factory presets, 10factory presets, Factory presets – Barco CINE7 R9010050 User Manual
Page 71: Random access adjustment mode how to adjust cti, 10factory presets what can be done, How to set to the factory presets
8. Random Access Adjustment Mode
How to adjust CTI?
1. Push the cursor key
↑
or
↓
to highlight CTI and press ENTER to select. (menu 8-38)
The LTI bar scale will be displayed. (image 8-9)
2. Push the cursor key
↑
or
↓
to adjust the CTI value.
Note:
Only 7 steps are possible.
3. Press EXIT to return to the Limo Pro Options menu.
LINE MULTIPLIER
CORING
LTI
CTI
WARNING: ADVANCED ADJUSTMENT
SHOULD BE PERFORMED ONLY BY
QUALIFIED PERSONNEL
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-38
Image 8-9
CTI bar scale
8.5.7.10.10Factory Presets
What can be done?
All settings for the Line Multiplier can be set to the Factory Presets.
These Factory Presets settings are:
Time Base Correction
On
Luminance Delay
0
Vertical Sync Reference
Indirect
Clamp Gating
Off
How to set to the Factory Presets?
1. Push the cursor key
↑
or
↓
to highlight Factory Presets. (menu 8-39)
2. Press ENTER to set to the Factory Presets?
3. Press EXIT to return to the Image Processing menu.
LINE MULTIPLIER
TIME BASE CORRECTION
LUMINANCE DELAY
V SYNC REF: INDIRECT
CLAMP GATING: OFF
LIMO PLUS OPTIONS
FACTORY PRESET
WARNING: ADVANCED
ADJUSTMENT SHOULD BE
PERFORMED ONLY BY QUALIFIED
PERSONNEL
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-39
R5976584 BARCO CINE7 26022003
67