Barco CINE7 R9010050 - Manual (Page 49)

7. Entering the service menus
7. ENTERING THE SERVICE MENUS
Overview
• The Adjustment menus
• Password Protection
7.1 The Adjustment menus
What is available in the Adjustment menus
A complete set of adjustments divided in different modes are available to adjust the projector, these different modes are:
IRIS To autoalign and autoconverge the projector.
Guided Guided should be selected if the user intends to perform a complete alignment of the projected
image. All the necessary geometry and convergence adjustments are executed in a predetermined
sequence.
Random Access Should only be accessed if the user is highly qualified and knows the sequence of adjustments.
Has to be used to adjust the image.
Installation Should only be selected if the projector is relocated and/or a different screen size is desired. When
selecting Installation the user or operator will be warned to call a qualified technician to perform
the installation procedure.
Service Should only be selected if the user intends to change the predefined settings.
How to enter the Adjustment menus with the RCU?
1. Press the ADJUST key.
The Main menu will be displayed. (menu 7-1)
2. Push the cursor key ↑ or ↓ to select Service menus.
3. Press ENTER to select.
A warning will be displayed. (menu 7-2)
4. If qualified, press ENTER to continue.
The Service main menu will be displayed. (menu 7-3)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-1
WARNING
RISK OF INCORRECT
ADJUSTMENT OF THE
PROJECTOR.
The following
SERVICE menus
are reserved to,
and to be performed only
by qualified personnel !
If qualified, press
<ENTER> to continue, or
if not, <EXIT> to return.
Menu 7-2
ADJUSTMENT MODE
Select a path from below :
IRIS
GUIDED
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-3
How to enter the Adjustment menus with the local keypad?
1. Press the ADJUST key.
The projector displays the General Access Menu. (image 7-1)
2. Use the cursor keys to highlight enter ADJUST.
3. Press ENTER to select.
The Main menu will be displayed (menu 7-1).
4. Continue as described in How to enter the Adjustment menus with the RCU.
R5976584 BARCO CINE7 26022003 45