Barco CINE7 R9010050 - Manual (Page 80)

8. Random Access Adjustment Mode
What can be done with the Seagull correction
Use this correction after the image has been adjusted with top and bottom bow and keystone. If still a deformation (like a seagull)
on top and bottom of the image is visible, proceed to the seagull correction. Due to interaction, it is possible that the top and bottom
bow have to be readjusted after adjusting the seagull correction to obtain an improved image.
The default value on the bar scale of this correction is 50.
How to adjust the Seagull correction
1. Push the cursor key
↑
or
↓
to highlight SEAGULL CORRECTION. (menu 8-50)
2. Press ENTER to activate.
Eliminate the deformation by pushing the cursor key
←
or
→
until a straight line is obtained (image 8-15)
TOP-BOTTOM (N-S)
H CENTERLINE BOW
H CENTERLINE SKEW
TOP KEYSTONE
TOP BOW
BOTTOM KEYSTONE
BOTTOM BOW
SEAGULL CORRECTION
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-50
Image 8-15
Seagull correction
8.6.6 Size Adjustment
What can be done?
To adjust (correct) a little bit the horizontal and vertical picture size (when the projector is on its correct position) in regard with the
installed screen.
76 R5976584 BARCO CINE7 26022003