Philips Kaffeevollautomat - Manual (Page 17)

Flushing
1 Press the MENU button.
The button lights up.
 The message ‘START FLUSHING?’ appears on the display.
 Place a cup under the coffee spout and press the OK button.
Descaling
Over time, the continuous heating up of the water that is used to make
the coffee leads to scale build-up in the inner circuits of the appliance.
When the message ‘PLEASE DESCALE!’ appears on the display, you should
run the descaling program. Proceed as follows:
1 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘START DESCALING?’
appears on the display.
 Press the OK button.
The message ‘ADD DESCALER! - OPEN STEAM KNOB!’ appears
on the display.
 When you descale the appliance for the first time, use the bottle of
durgol® descaler supplied. Fill the water tank with the entire bottle
of durgol® descaler (15ml) and 1 litre of water.
If you use a different descaler, follow the instructions on the package of the
descaler.
Note: Use the descaler supplied with the appliance or a liquid descaler based
on citric acid. Never use a descaler with acetic acid, as this will damage the
appliance.
Note: Be careful not to spill descaler on the metal surfaces of the machine
and on surfaces sensitive to acid such as marble, limestone and glaze. If you
spill descaler on these surfaces, immediately wipe it off with a cloth to prevent
stains.
5 Place a bowl with a minimum capacity of 1.5 litres under the steam
pipe.
,
,
,
EnglisH 1