Philips Kaffeevollautomat - Manual (Page 19)

 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘SET AUTO-ON?’ appears on
the display.
 Press the OK button.
The message ‘AUTO-ON: Disabled’ appears on the display.
5 Press the ^ or % or button to set the hour of the auto-on time.
6 Press the OK button to confirm the hour set.
 Press the ^ or % button to set the minutes of the auto-on time.
8 Press the OK button to confirm the minutes set.
The appliance automatically exits the MENU mode.
Note: When you switch off the appliance while an auto-on time is set, the >
symbol appears next to the time on the unlit display. The clock and the symbol
disappear after 5 minutes.
setting auto-off time
The appliance is factory preset to switch off automatically one hour after
the last cup of coffee is brewed. You can increase this time to 2 hours or 3
hours.
1 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘SET AUTO-OFF?’ appears on
the display.
 Press the OK button.
 Press the ^ or % button to change the number of hours after which
the appliance switches off automatically.
5 Press the OK button to confirm the set auto-off time.
The appliance automatically exits the MENU mode.
setting current time
1 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘SET CURRENT TIME?’
appears on the display.
 Press the OK button.
The message ‘CURRENT TIME: 00:00’ appears on the display.
 Press the ^ or % button to set the hour of the current time
5 Press the OK button to confirm the hour set.
6 Press the ^ or % button to set the minutes of the current time.
 Press the OK button to confirm the minutes set.
The appliance automatically exits the MENU mode.
,
,
,
,
,
,
,
,
EnglisH 19