Changing the coffee quantity for espresso, Frothing milk for cappuccino – Philips Kaffeevollautomat User Manual

Page 13

Advertising
background image

Never add more than 1 level spoonful of ground coffee, otherwise

the appliance does not brew coffee or the ground coffee is dispersed

inside the appliance, soiling it or causing only drops of coffee to come

out of the spouts.

If you have added more than 1 level spoonful of ground coffee,

remove the brewing unit. Then clean the brewing unit and the

appliance as described in chapter ‘Cleaning’. After this, use the handle of

a spoon to push the ground coffee down the funnel.

Only fill the ground coffee compartment with ground coffee for

espresso makers. Do not use unground coffee beans, freeze-dried coffee,

caramelised coffee or other substances that could damage the appliance.

1

Press the coffee strength/ground coffee button.

The ^ and % buttons and the OK button light up.



Use the ^ or % button to select the ground coffee function.



Press the OK button.



Open the lid of the ground coffee container and put one level

measuring spoon of ground coffee in the funnel.

5

Brew 1 cup of coffee as described in ‘Brewing espresso from coffee

beans’, steps -6.

When you use ground coffee, you cannot brew  cups at the same time.

6

If you want to make coffee from beans instead of ground coffee again,

press the coffee strength/ground coffee button and select the desired

coffee strength with the ^ or % button.



Press the OK button to confirm the desired coffee strength.

changing the coffee quantity for espresso

The appliance is preset to brew the following coffee quantities:

short coffee: 40ml

standard coffee: 80ml

long coffee: 120ml

To change the standard quantities, proceed as follows:

1

Put a cup under the coffee spout.



Press the button for short coffee, standard coffee or long coffee,

depending on which quantity you want to change. Press this

button for 5 seconds UNTIL the message ‘PROGRAM TO SET VOL...’

appears on the display and then release it.

The appliance starts to brew coffee.



When the coffee in the cup reaches the required level, press the

same button again to set the new quantity.

’SETTING DONE!’ appears on the display. The appliance now brews

the set quantity until you change it again.

Frothing milk for cappuccino

1

Fill a clean milk jug or cup with fresh skimmed milk.

-

-

,

-

-

-

,

,

EnglisH

1

Advertising