Philips Kaffeevollautomat - Manual (Page 21)

The coffee maker is now programmed to display the ‘PLEASE
DESCALE!’ message based on the actual hardness of the water you
use.
setting language
1 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘SET LANGUAGE?’ appears on
the display.
 Press the OK button.
 Press the ^ or % button until the desired language appears on the
display.
5 Press the OK button.
The appliance automatically exits the MENU mode.
resetting to default settings
If you have changed the preset settings, you can reset the appliance to the
default settings as follows:
Note: The appliance resets all menu parameters except the language and the
clock.
1 Press the MENU button.
The button lights up.
 Press the ^ button until the message ‘RESET TO DEFAULT?’ appears
on the display
 Press the OK button.
While the appliance is resetting, the message ‘SETTING’ is shown on
the display.
When the reset is complete, the message ‘SETTING DONE’ is
shown on the display.
The appliance automatically exits the MENU mode.
cleaning
Let the appliance cool down and unplug it before you clean it.
Never immerse the appliance in water or any other liquid.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance. Only use a damp cloth.
cleaning the appliance
1 Clean the waste bin after brewing 1 cups. See chapter ‘Using the
espresso maker’, section ‘Brewing espresso’.
 Clean the water tank regularly.
,
,
,
,
,
,
,
EnglisH 1