SkyTrak 10054 Operation Manual - Manual (Page 149)

General Maintenance
147 Model 10054 Rev. 11/03
3. Attach a remote portable hydraulic pressurizing unit to the parking
brake gauge port (3) on the secondary function manifold (4)
mounted on the inside wall of the frame (5) on the left side next to
the transmission.
4. Turn the key switch to the ON position (with the engine not run-
ning), release the park brake (park brake switch OFF), and have an
operator seated in the seat.
CAUTION:
DO NOT exceed 575 psi (40 bar) when pressur-
izing the park brake. Applying too much pressure may damage
the brake seals.
4
OH1840
Front Of
Vehicle
3
5